MANUFACTURE OF LIGHTWEIGHT PREFABRICATED PANELS EMPLOYING MINE TAILINGS

Contenido principal del artículo

Fermín Ramírez-Crescencio
Jaime Parra-Véjar
Verónica Loera-Castañeda
Luis Antonio Aguilar-Pérez
Ignacio Villanueva-Fierro

Resumen

The present study describes the incorporation of mine tailings from the silver mine La Guitarra in the manufacture of lightweight prefabricated panels (LPPs). Tailings have concentrations of heavy metals below the maximum permissible levels according to Mexican regulations. Their acidity potential (AP) of 2.22 kg of CaCO3 per tailings ton, along with their lack of neutralization potential (NP), indicates a possibility for the generation of acid mine drainage (AMD). It was reported that concrete could be employed to prevent AMD, thus we proposed to stabilize mine tailings with different concrete ratios and employ these mixtures to fabricate concrete panels. To obtain lightweight panels, a foaming agent was added to the tailings/concrete mixture. Then, a fiberglass mesh was employed to reinforce the final structure. The resulting LPPs (dimensions: 254 × 139.7 × 12.7 mm) showed a flexural strength of 5.80 ± 0.06 MPa, bulk density of 712 ± 104 kg/m3, thermal conductivity of 0.159 ± 0.004 W/m K, mass water absorption of 59 ± 10 %, and net neutralization potential (NNP = NP/AP) > 1.2. According to Mexican regulations, these LPPs are not potential generators of AMD.

Descargas

Los datos de descargas todavía no están disponibles.

Detalles del artículo

Biografía del autor/a

Fermín Ramírez-Crescencio, Instituto Politécnico Nacional, CIIDIR Unidad Durango. Calle Sigma 119, Fracc. 20 de Noviembre II, C.P. 34220 Durango, Dgo., México.

Dr. en Química egresado de la UNAM

Jaime Parra-Véjar, Instituto Politécnico Nacional, CIIDIR Unidad Durango. Calle Sigma 119, Fracc. 20 de Noviembre II, C.P. 34220 Durango, Dgo., México.

M. en C. Egresado del Instituto Politécnico Nacional

Verónica Loera-Castañeda, Instituto Politécnico Nacional, CIIDIR Unidad Durango. Calle Sigma 119, Fracc. 20 de Noviembre II, C.P. 34220 Durango, Dgo., México.

Dra. en C. Egresada de la Universidad Autónoma de Guadalajara

Luis Antonio Aguilar-Pérez, Instituto Politécnico Nacional, CIIDIR Unidad Durango. Calle Sigma 119, Fracc. 20 de Noviembre II, C.P. 34220 Durango, Dgo., México.

Dr. en C. Egresado del Instituto Politécnico Nacional

Ignacio Villanueva-Fierro, Instituto Politécnico Nacional, CIIDIR Unidad Durango. Calle Sigma 119, Fracc. 20 de Noviembre II, C.P. 34220 Durango, Dgo., México.

Dr. en C. Egresado del New Mexico Institute of Mining and Technology

Compartir en:

PLUMX metrics