PHOTOCATALYTIC SOLAR OXIDATION OF ACESULFAME-K. EFFECT OF INITIAL pH, CATALYST DOSE AND OXIDANT CONCENTRATION
Contenido principal del artículo
Resumen
Aqueous acesulfame-K was oxidized in a pilot solar photocatalytic reactor, equipped with a compound parabolic collector (CPC). The reactor has an area of 0.40 m2 of CPC collectors with geometrical concentration ratio of 1 and a simple mechanical configuration. The experiments of photocatalytic oxidation of acesulfame-K were performed by treating 2 L of water with an initial concentration of 15 mg/L. The photocatalyst used was P25 (Aeroxide TiO2) from Evonik. One of the goals of the research work was to find a set of conditions to efficiently remove this emerging concern pollutant. Results allowed proposing a set of reaction conditions that lead to a high removal of acesulfame-K. In addition, the experimental design allowed determining the effect of initial pH as well as the impact of initial concentrations of photocatalyst and chemical oxidant. The removal efficiency of acesulfame-K and related UV-absorbing species reached values up to 96-99 % and there was not a quantifiable amount of intermediate products (analyzed as UV absorbing species). Despite reaction time was fixed in 3 h for all the experiments, oxidation efficiencies higher than 95 % were reached at 2 h of reaction or even before.
Descargas
Detalles del artículo
Esta obra está bajo una licencia internacional Creative Commons Atribución-NoComercial 4.0.
Una vez que un artículo es aceptado para su publicación, el autor está de acuerdo en que los derechos de su texto pasan a ser propiedad de la Revista Internacional de Contaminación Ambiental con las implicaciones legales que esto significa.
Se autoriza la reproducción total o parcial de los textos aquí publicados siempre y cuando sea sin fines de lucro y se cite la fuente completa y la dirección electrónica de la publicación.
Los autores son libres de depositar sus artículos publicados, de manera íntegra, es decir sin modificaciones, en cualquier tipo de repositorio siempre y cuando éste opere sin fines de lucro.
La distribución de artículos aceptados, pero aún no publicados, por cualquier medio no está permitida. La infracción de esta norma puede ocasionar que el artículo aunque ya esté aceptado, sea retirado de su publicación.
PLUMX metrics