PERFORMANCE OF A MICROBIAL FUEL CELL OPERATED WITH VINASSES USING DIFFERENT COD CONCENTRATIONS
Contenido principal del artículo
Resumen
Vinasses are one of the main wastes generated from the mezcal industry in Mexico. Due to their high organic matter content and low pH, vinasses have negative environmental impacts if discharged without any treatment. An alternative treatment of vinasses is their use in microbial fuel cells (MFC) for organic matter removal and electricity production. In this paper, the performance of a MFC using vinasses is analyzed. Different organic matter concentrations in terms of chemical oxygen demand (COD) were tested and compared regarding power density, internal resistance, and voltage production. The results demonstrated that the highest COD tested resulted in a poor MFC performance. When using vinasses in MFC for 10 days, COD of 6000 mg/L generated 80.64 W/m3 and when using vinasses with a COD of 17 143 mg/L, the power density dropped to 5.13 W/m3. Further tests of COD performance in MFC were made with 10 640 and 6760 mg/L for 68 days. It was demonstrated that a COD of 10 604 mg/L only produced 0.61 V, while a COD of 6760 mg/L reached 0.81 V. Regarding the organic matter removal, the highest COD removed (92 %) was obtained when using vinasses with a COD of 10 604 mg/L. By operating the cell with 6000 mg/L, COD removal was 83 % and with 17 143 mg/L, 49 %. To achieve a better MFC performance, the organic matter content in the electrolyte should not exceed 6000 mg/L so that the MFC does not achieve a saturated state that hinders the oxidation mechanisms and thus electricity production and COD removal.
Descargas
Detalles del artículo
Una vez que un artículo es aceptado para su publicación, el autor está de acuerdo en que los derechos de su texto pasan a ser propiedad de la Revista Internacional de Contaminación Ambiental con las implicaciones legales que esto significa.
Se autoriza la reproducción total o parcial de los textos aquí publicados siempre y cuando sea sin fines de lucro y se cite la fuente completa y la dirección electrónica de la publicación.
Los autores son libres de depositar sus artículos publicados, de manera íntegra, es decir sin modificaciones, en cualquier tipo de repositorio siempre y cuando éste opere sin fines de lucro.
La distribución de artículos aceptados, pero aún no publicados, por cualquier medio no está permitida. La infracción de esta norma puede ocasionar que el artículo aunque ya esté aceptado, sea retirado de su publicación.
PLUMX metrics